Scope bases are essential in any rifle you want to attach a scope to. They connect your rifle to your scope rings, which secure your scope into place. Having a good scope base is a must if you want to keep your scope accurate and prevent damage to your equipment. In this article, I am going to show you some of the best scope bases for the Remington 700 rifle. This rifle is one of the most popular bolt-action rifles ever made and is revered by both civilians and military forces alike.

Besides being a staple in hunting and competitive shooting, the Remington 700 has also served as a base for other widely known sniper rifles, such as the M24 and M40.

Due to the popularity of this rifle, scope bases are aplenty and choosing the best one for your use-case can be a very daunting task. You will have to choose the material, the type of rail and other small features that can greatly improve your shooting experience.

Luckily, I am here to help you. Let’s see what the best scope bases for the Remington 700 are.


Best Scope Bases for Remington 700 Review

Our Pick
NightForce Remington 700 One-Piece 20MOA Bases — best scope base for remington 700 long action

NightForce Remington 700 One-Piece 20MOA Bases — best scope base for remington 700 long action

The Nightforce Remington 700 One-Piece 20MOA base is a steel base that securely attaches to your rifle and guarantees both precision and minimal stress on your weapon.

View on OpticsPlanet View on Amazon

The Nightforce[1]https://www.nightforceoptics.com/ Remington 700 One-Piece 20MOA base is a heavy-duty scope base, milled from a solid steel block. This sturdy picatinny rail base will complement your long-action rifle and allow you to install both scopes and picatinny attachments.

Since this is a long-action base, it will only work on long-action calibers. While there are similar alternatives for short-action Remington 700s, this particular model will not work unless you have a long-action rifle.

The scope base itself sits flush on the rifle. At the bottom of the base, a machined recoil lug further increases the fit — as well as helps deviate recoil to the stock, reducing the stress applied on the weapon itself.

Although this particular model is 20MOA, the Nightforce Remington 700 One-Piece base is also available in a 40MOA variant. These bases are totally ambidextrous and can be used with left or right-handed actions. The loading and unloading processes are also unhindered.

Any scope you choose to use with this base (assuming you are also using high-quality scope rings) will keep its zero — this base sits solidly on the rifle and does not move at all, if properly installed at least.

If you have a long-action Remington 700, the Nightforce One-Piece base is an easy recommendation, and one that will surely satisfy your needs.

Will this base fit on a Remington 700 5R with a 300 Win mag?

Yes. This base will fit perfectly.

Will the NightForce Remington 700 One-Piece 20 MOA Base fit a .223 Remington 700?

There are two different models of the Remington 700 — one is short action and the other is long action. On the short action model, the action screws are 6.5 inches apart, while on the long action models the screws have a distance of 7.35 inches.

This distance difference makes interchanging bases between the two models impossible. Since the .223 Remington 700 is a short action variant of the Remington 700, and the Nightforce Remington 700 One-Piece 20MOA Base is meant for long-action models, this product will not fit the aforementioned Remington 700 model.

Also Interesting: 30mm Scope Rings.


Best Value
Talley Lightweight Alloy Scope Mounts for Browning/Howa/Remington

Talley Lightweight Alloy Scope Mounts for Browning/Howa/Remington

The Talley Lightweight Alloy Scope Mounts attach directly to the weapon, removing the need for a scope base. If you want to use as little equipment as possible, then these scope mounts are the right choice for you.

View on OpticsPlanet

While scope mounts are usually mounted onto a base rail, things do not have to be that way. Although it is easier for everyone to have bases with standard rails (such as picatinny) in which you can fit several different accessories, there is also the possibility of directly attaching the scope mounts to the rifle itself — and that’s exactly what Talley does.

Of course, it is easy to understand why manufacturers do not go this route — unlike standardized rails, rifles come in many shapes and forms. Picatinny scope mounts can be mounted onto any picatinny rail, while this Talley[2]https://www.talleymanufacturing.com/ scope mount can only be mounted onto Browning, Howa or Remington rifles.

Since it can be mounted onto Remington rifles and this is an article about Remington scope bases, things are not that bad — but it is understandable why scope mounts like this one are so rare.

The scope mounts attach directly to the upper receiver and firmly secure your scope. These rings work as good as any other rings mounted onto a base rail.

If you want to strip your weapon to its bare essentials (while still using a scope), then this scope mount is not a bad choice. However, if you want a bit more versatility and the option to attach more accessories to your Remington 700 rifle, then you should stay away from the Talley Lightweight Allow Scope Mount.

Read More: Quick Disconnect Scope Mounts.


Also Great
Leupold Standard Base & Rings Combo Pack — best scope base and rings for remington 700

Leupold Standard Base & Rings Combo Pack — best scope base and rings for remington 700

The Leupold Standard Base & Rings combo pack offers the possibility of mounting a scope without the need of a rail base. The rings are solid and as good as any base-mounted ring set.

View on OpticsPlanet

Just like Talley, Leupold[3]https://www.leupold.com/ also offers its customers the possibility of attaching their scopes directly onto their rifles. The Leupold standard base comes in a few different models and is available in several different sizes for Remington, Browning, Savage, Tikka, T/C Encore, Weatherby, and Winchester rifles.

The Leupold base & rings combo pack is made from solid steel and is resistant to impacts. Besides being a very durable piece of equipment, these rings won’t be negatively impacted by recoil and will constantly provide top-tier accuracy.

These rings are available in super low, low, medium, high, and super high heights, in both 1” and 30mm dimensions. They will fit basically any scope you want to fit onto your Remington 700 and with plenty of room to access the rifle breech.

If you are looking for durable and recoil-resistant rings that do not need a scope base, then the Leupold STD Base & Ring combo pack might be worth looking into.

What’s the size of these rings?

These rings are 1”.

Can you use 40mm objectives with these rings?

Yes. These rings are tall enough to be used with 40mm objectives.

Read Next: 34mm Scope Rings.


Our Pick
EGW Picatinny Rail Scope Mount

EGW Picatinny Rail Scope Mount

The EGW Picatinny Rail Scope Mount is an aluminum scope mount for short-action Remington rifles. It is level on both sides and totally ambidextrous.

View on OpticsPlanet

The EGW[4]https://www.egwguns.com/ Picatinny rail scope mount is a sturdy short-action Remington scope mount that will let you attach picatinny and weaver-mount accessories to your rifle.

It is made from T6 extruded aluminum and coated in a matte black finish, giving it a sleek appearance. The aluminum build makes it a very resistant scope mount, but also extremely lightweight: the EGW Picatinny Rail Scope Mount weighs less than 3 ounces.

Due to the internal differences of short-action and long-action Remington 700 rifles, this rail will not work with the long-action variants. It is exclusively for short-action rifles. Unlike other rails, this rail is also not compatible with the similar Howa 1500, Weatherby, and Vanguard rifles.

There are a couple of different versions of this rail available. Customers can choose between a 0 and a 20 MOA version. The rail is ambidextrous and will not hinder left-handed actions.

Although a simple rail, the EGW Picatinny is also a reliable rail. If you are looking for a no-frills solution that you can attach to your Remington 700 rifle, then look no further.

How do the 20 MOA and the 0 MOA versions compare?

Minutes of angle are units of measurement that can be used to determine the accuracy of a rifle. 1 MOA is equal to 1/60th of one degree. Since a complete circle has 360 degrees, a single MOA might seem like a very minute (sorry for the pun) distance, however, the longer the range, the higher the impact of that small distance will be.

Assuming you are at the center of a circle and shooting a target at the edge of that same circle, 1 MOA means that in a circle with a 100-yard radius, the shot will be within one inch of the target. At 200 yards it will be at 2 inches, and so on, so forth.

To compensate for this (different scope/rifle combinations have different MOAs) you might need to adjust your scope’s elevation. However, the adjustments that the scope itself allows you to make might not be enough to compensate for the MOA difference. If you need to account for a 35 MOA difference, but the scope only lets you adjust a maximum of 30 MOA… Well, you get how that can be troublesome.

To compensate for that, some scope mounts or scope bases also offer MOA adjustments. These mounts slightly tilt your scope downwards, so that it is possible to make the exact adjustments that you need.

In this case, the 20 MOA version has a 20 MOA inclination, while the 0 MOA version is perfectly level. Which one is best for you will depend on your use case.

Related Content: How to mount a scope on AR-15 with front sight.


Best Scope Bases for Remington 700 Buyer’s Guide

What is a Remington 700?

The Remington 700 is one of the most popular bolt-action rifles in the USA. It was developed in 1962 by Remington Arms, based on the design of the Remington 721 and 722 rifles, which date back to 1948.

This rifle is successful among both civilians and the armed forces — the military uses the M24 and M40 sniper rifles, which are based on the Remington 700.

The Remington 700 has a bolt-action (which can be either short or long) and two forward lugs, with the bolt face being recessed and encloses the cartridge base. The plunger ejector is actuated by a coil spring and the receiver is made from steel.

As it is one of the better-known bolt-action rifles, the Remington 700 is available in a multitude of configurations. Users can choose between different stocks, barrels, and calibers straight from the manufacturer.

Check This Out: Types of Scopes.

How to choose a scope bases for the Remington 700?

Best Scope Base for Remington 700

Choosing a scope base for the Remington 700 can seem like a complex task due to the amount of scope bases available. However, once we analyze them thoroughly, we see that they are all quite similar, with only a few differentiating factors which your decision will boil down to.

Before you start thinking about which scope base to buy, you first need to know a few things. You will need to know which type of Remington 700 you have, and whether you want to mount more accessories other than the scope.

The first item is arguably much more important than the second. Due to the design differences between short-action and long-action Remington 700 rifles, rail scope mounts will rarely fit both models. If you don’t want to waste your money, or go through the trouble of refunding your purchase, it is crucial you know which type of Remington 700 it is that you have.

Once you have that information figured out, you then need to decide if you are strictly going to use a single scope on your rifle, or if you might use a few more accessories down the line. This is also important because you will have to decide between scope mounts that directly attach to the rifle and rail scope mounts, that allow for extra compatible accessories.

If you want the possibility of versatility, then a picatinny rail base is probably the best option for you. These bases are compatible with most of the scope mounts available out there, as well as with several different accessories, such as red dot sights.

The alternative is slightly lighter but does not give you nearly as many customizing options. Instead of using a picatinny (or any other type of standard) rail, you can choose a scope base that directly attaches to the rifle.

The advantages of this system are that it is lighter (but not always) and more straightforward. However, as I said, it is less versatile. It might also not be optimal for large calibers, as the windage screws on the direct mounts might not be able to withstand the recoil of a large caliber bullet.

The direct-mount systems also prevent you from using mounts such as quick-detach mounts, which can be very valuable if you are someone who changes scopes often. If that is your case, then a picatinny rail seems like the obvious solution — it provides considerably more advantages than mounting the scope base directly onto the rifle.

The negative thing about the picatinny rails is that they are an extra cost. While a scope base that attaches directly to the rifle lets you attach your scope with a single purchase, the picatinny rail will require you to buy the mounting rings separately.

You have to weigh your options and decide which of the two is best for you. Once you have that figured out, choosing the best scope base for your Remington 700 shouldn’t be very difficult. The prices are relatively similar and the differences between two different bases of the same type are almost negligible.


Conclusion

Choosing the best scope base for your Remington 700 is not a particularly hard task. You just need to understand what it is that you value the most. Hopefully, with this article I’ve helped you understand the features that would best be of service to you.

If you have a long-action Remington 700, then I found the Nightforce Remington 700 One-Piece 20MOA base to be one of the best scope bases for that particular type of Remington rifle. It attaches very firmly to the rifle and provides unparalleled accuracy.

Alternatively, if you have the short-range variant, then the EGW Picatinny rail base is the best bet for you. This aluminum scope base is sturdy and comes in both 0 and 20 MOA variations, allowing you to choose the option that better complements your rifle and scope combination.

Of course, you might not be interested in a picatinny rail and prefer a scope base that directly attaches to the rifle. If that’s your case, then the Leupold Standard Base & Rings combo pack is theoretically right up your alley. Leupold has always produced high-quality scopes and scope mounts and this base and rings combo pack is no exception.

At the end of the day, the important thing is to secure your scope safely and firmly and to guarantee that your gear does not hinder your performance. All of the scope bases on this article will help you maintain your accuracy, while providing a secure way of attaching your scope to your rifle.

Which scope base do you use for your Remington 700? Let us know below.

 

About the author

Patrick Howard

I have been working as a gunsmith for 20 years. Rain, fog, moisture, high temperature, or even snow are all the things a product must withstand in order to be recommended by me.

Leave a Comment